Extruder

Extruder Features: 1) Extended clamp opening stroke to meet special molding requirements 2) With high speed and injection

Extruder

Features: 1) Extended clamp opening stroke to meet special molding requirements2) With high speed and high pressure injection capability, is suitable for highprecision and thin wall molding products3) Four-stage of injection speed, three-stage of holding pressure4) Four-stage of metering phase can be setup according to products' requirements5) Linear position transducer is used for clamp, screw, ejector and carriagestroke measurement with 0.1mm resolution 6) Super silence hydraulic circuit design

GM3400		A	B
INJECTION UNIT
SCREWD IAMETER	mm	65	75
DRAWRATIO OF SCREW		20.7	18
Theoretical Shot Volume	cm3	978	1303
Injection Weight	g	890	1162
Injection Rate	g/s	288	384
Plasticizing Capacity	g/s	32.9	43.8
Injection Pressure	Mpa	170	128
Serew Speed	r/min	0200
CLAMPING UNIT
Clamp tonnage	KN	3400
Toggle stroke	mm	620
Space Between Tie Bars	mm×mm	665×665
Space between tie-bars(MIN-MAX)	mm	250-680
MAX.Daylight	mm	1300
Ejector Stroke	mm	185
Ejector tonnage	KN	70
Ejector Number	Piece	5
GENERAL
System Pressure	Mpa	14
Pump motor Power	KW	30
Heater power	KW	17.8
××MACHINE DIMENSIONL×W×H	m	6.7×1.8×2.0
Machine Weight	T	12
Oil Tank Capacity	L	700

Shanghai GS(GuangSu) Machinery Manufacture Co.,Ltd

AddNo.888,Kungang Rd, Songjiang Sci.& Tech. Park, Shanghai,ChinaTel +8621-5785 0702; 5785 0726; 5785 0727Fax +8621-5785 0725 

Extruder